Deck Control Manifold - Toro Groundsmaster 4500-D Series Service Manual

Deck Control Manifold

g308889
1. Deck control manifold
2. Filter mount bracket
3. Flange head screw (2 used)
Removal (Figure 123)
Hydraulic System: Service and Repairs
GROUNDSMASTER 4500-D SHOWN
4. Hydraulic oil filter assembly
5. Valve mount bracket
6. Flange head screw (2 used)
Note: The deck control manifolds used on Groundsmaster 4500-D and 4700-D
are different but they mount to the machine in the same location. The control
manifolds used on the Groundsmaster 4500-D are shown in
Note: The ports on the deck control manifold are marked for easy identification
of components. Example: P1 is the gear pump connection port (see
(page A–1)).
1. Park machine on a level surface, lower cutting decks, stop engine, apply
parking brake and remove key from the ignition switch.
Figure 123
Page 5–130
7. Lift control manifold
8. Flange head screw (2 used)
9. Fan drive manifold
Figure 123.
Appendix A
Groundsmaster ®
19245SL Rev A
4500-D/4700-D