Two Speed Shift Manifold - Toro Groundsmaster 4500-D Series Service Manual

Two Speed Shift Manifold

g308769
1. Two speed shift manifold
2. Cap screw (2 used)
3. Flange nut (2 used)
4. Rear traction control manifold
5. Lift circuit junction manifold
Removal (Figure 108)
Groundsmaster ® 4500-D/4700-D
19245SL Rev A
6. Hydraulic tube
7. O-ring
8. Hydraulic tube
9. O-ring
10. Hydraulic tube
Note: The ports on the two speed shift manifold are marked for easy identification
of components. Refer to the
1. Read the General Precautions for Removing and Installing Hydraulic System
Components (page
2. To prevent contamination of hydraulic system during manifold removal,
thoroughly clean exterior of two speed shift manifold.
3. Label all hydraulic lines for assembly purposes.
Figure 108
11.
12.
13.
Appendix A (page
5–87).
Page 5–113
O-ring
O-ring
Hydraulic tube
A–1).
Hydraulic System: Service and Repairs