Bevel Gear Case And Axle Case - Toro Groundsmaster 4500-D Series Service Manual

Bevel Gear Case and Axle Case

Removal
Axles, Planetaries and Brakes: Service and Repairs
The following procedures assume the rear axle assembly has been removed
from the machine.
47 to 56 N·m
(35 to 41 ft-lb)
g276508
1. Cap screw (4 used)
2. Lock nut (2 used)
3. Lock washer (2 used)
1. Remove the mounting screws, nuts and lock washers. Remove the bevel
gear case/axle case assembly and O-ring from the axle support
2. Mark both right and left bevel gear case/axle case assemblies.
Do not interchange right and left bevel gear case/axle case
assemblies.
g276510
1. Axle case
2. Axle cover assembly
3. Remove the axle cover mounting screws. Remove the axle cover from the
axle case as an assembly
4
2
3
Figure 245
4. Axle support
5. Bevel gear case/axle case assembly
6. O-ring
IMPORTANT
(17 to 20 ft-lb)
1
2
Figure 246
3. Screw (6 used)
4. O-ring
(Figure 246).
Page 7–22
47 to 56 N·m
(35 to 41 ft-lb)
1
5
6
(Figure
23 to 27 N·m
4
3
Groundsmaster ® 4500-D/4700-D
19245SL Rev A
245).