Engine Cooling Fan Motor - Toro Groundsmaster 4500-D Series Service Manual

Engine Cooling Fan Motor

g308936
1. Cap screw (4 used)
2. Fan
3. Flange head screw (4 used)
4. Flange nut (4 used)
5. Fan motor and bracket assembly
6. Flange head screw (8 used)
7. Flat washer (8 used)
8. R-clamp (2 used)
Removal (Figure 136)
Groundsmaster ® 4500-D/4700-D
19245SL Rev A
9. Radiator/oil cooler assembly
10. Air intake hose
11. Washer (4 used)
12. Flange nut (6 used)
13. Cap screw (6 used)
14. Support shim (2 used)
15. Upper fan shroud
16. Hydraulic tube
1. Park machine on a level surface, lower cutting decks, stop engine, apply
parking brake and remove key from the ignition switch.
Figure 136
17.
18.
19.
20.
21.
22.
Page 5–147
Hydraulic tube
Hydraulic tube
O-ring
O-ring
Bulkhead nut
Bulkhead nut (2 used)
Hydraulic System: Service and Repairs