Toro Groundsmaster 4500-D Series Service Manual page 241

Removal (Figure 130) (continued)
Groundsmaster ® 4500-D/4700-D
19245SL Rev A
g308911
1. Roller support
2. Screw (2 used)
3. Carriage screw (2 used)
g308912
4. Slide rubber bellows up from bottom of steering column. Support steering
column to prevent it from falling.
5. Read the General Precautions for Removing and Installing Hydraulic System
Components (page
6. Thoroughly clean hydraulic connections prior to loosening hydraulic lines.
7. Label all hydraulic connections for assembly purposes. Note port
designations on steering control valve
Before opening hydraulic system, operate all hydraulic controls to
relieve system pressure and avoid injury from pressurized hydraulic
oil. See Relieving Hydraulic System Pressure (page
8. Disconnect hydraulic lines from steering control valve. Allow lines to drain
into a suitable container.
Figure 131
4. Headlight assembly
5. Flange nut (2 used)
6. Platform shroud
Figure 132
5–87).
(Figure
CAUTION
Page 5–139
132).
5–4).
Hydraulic System: Service and Repairs