Toro Groundsmaster 4500-D Series Service Manual page 296

Service Screen
Electrical System: General Information
g309317
1. Service menu
2. Service items
3. Move to menu items
The service screen (Figure
including hours and counts. Values listed for these service menu items cannot
be changed. If the machine PIN has been entered to allow access to protected
menu items in the settings screen, the protected service menu items will also be
listed and available in the service screen.
Note: If the protected menu items are available, PIN will be shown in the upper
right corner of the InfoCenter display.
The options listed for hours include the following:
•
Key On identifies the number of hours that the ignition switch has been in
the ON position.
•
Machine Run identifies the number of hours that the engine has been
running.
•
PTO On identifies the number of hours that the machine has been operated
with the cutting decks engaged.
•
High Range identifies the number of hours that the machine has been
operated in high range speed (transport).
•
Service Due identifies the number of hours before the next scheduled
maintenance is due.
The options listed for counts include the following:
•
Starts identifies the number of times that the engine has been started.
•
Left Deck (Groundsmaster 4700−D) identifies the number of times that the
left side cutting deck has been energized.
•
Center Deck identifies the number of times that the center cutting deck has
been energized.
•
Right Deck (Groundsmaster 4700−D) identifies the number of times that the
right side cutting deck has been energized.
•
Fan Reversals identifies the number of times that the engine cooling fan has
been operated in the reverse direction.
•
Fan − Coolant identifies the number of times that engine coolant temperature
caused the fan speed to change.
•
Fan − Oil identifies the number of times that hydraulic oil temperature caused
the fan speed to change.
1
Key On: 95.2 Hours
Machine Run: 72.3 Hours
2
PTO On: 63.7 Hours
5
3
5
3
Figure 174
4. Choose menu item
5. Back button
174) contains machine operational information
Page 6–14
4
Groundsmaster ® 4500-D/4700-D
19245SL Rev A