Toro Groundsmaster 4500-D Series Service Manual page 300

Settings Screen (continued)
About Screen
Electrical System: General Information
Smart Power allows the user to enable or disable the Smart Power feature.
Counter Balance allows counterbalance pressure applied by the cutting decks
to be adjusted. Options for counterbalance are low, medium and high.
Turnaround allows the user to set ON/OFF. The ON feature allows the decks to
be raised in turnaround position. The OFF feature allows the decks be able to
hover off the ground with PTO engaged until it is at or above the deck limit switch.
Acceleration allows the user to vary the aggressiveness of the acceleration of
the machine.
To return to the main menu screen from the settings screen, press the back
button (left button).
g309321
1. About menu
2. About items
3. Move to menu items
The about screen (Figure
number and software revisions for the TEC controllers, InfoCenter and engine
electronic control unit (if available). The about screen also lists the CAN−bus
status. Additional information is identified if the about screen is accessed after
the protected menus have been accessed by entering the PIN.
To return to the main menu screen from the about screen, press the back button
(left button).
1
About
2 413000103
S/W Rev: 122−1252A
5
3
5
3
Figure 178
4. Choose menu item
5. Back button
178) identifies the machine model number, serial
Page 6–18
30885
4
Groundsmaster ®
19245SL Rev A
4500-D/4700-D