Infocenter Display - Toro Groundsmaster 4500-D Series Service Manual

InfoCenter Display

Electrical System: General Information
g309292
1. InfoCenter display
The InfoCenter Display used on your Groundsmaster is a LCD device that is
located on the console. The InfoCenter provides information for the machine
operator during machine operation, provides electrical system diagnostic
assistance for technicians and allows inputs for adjustable machine settings.
Power for the InfoCenter is available when energized by the main power relay
(ignition switch in the RUN or START position). A CAN−bus system involving
the machine TEC controllers, the Yanmar engine electronic control unit and the
InfoCenter is used to provide necessary machine communication for InfoCenter
operation.
Note: Icons that are used on the InfoCenter display are identified in the Traction
Unit Operator's Manual.
Figure 166
2. Console arm
Page 6–8 Groundsmaster ® 4500-D/4700-D
19245SL Rev A