Removal
(Figure
297)
Installation
(Figure
Groundsmaster
®
4500-D/4700-D
19245SL Rev A
1. Park machine on a level surface, lower cutting decks, stop engine, engage
parking brake and remove key from the ignition switch.
2. Release hood latches and raise hood.
3. Remove hair pins and washers from pivot pins on radiator frame.
4. Remove hood from pivot pins and machine.
5. If necessary, disassemble hood using
6. Check bulb seals on screen (item 1) and replace seals if damaged.
297)
1. If components were removed from hood, assemble hood using
as a guide.
2. Slide hood frame onto radiator frame pivot pins.
3. Secure hood to frame with hair pins and washers.
4. Check hood alignment for correct operation of hood latches and dust seals.
Figure 297
Page 8–27
as a guide.
Figure 297
Chassis: Service and Repairs