Resistor Module (Machines With Two−Post Rops Extension Operator Fan Kit) - Toro Groundsmaster 4500-D Series Service Manual

Resistor Module (Machines with Two−Post ROPS Extension
Operator Fan Kit)
g276049
1. Operator's fan
2. Fan mount bracket
Testing
Groundsmaster ® 4500-D/4700-D
19245SL Rev A
1 2
The resistor module is attached to the rear of the fan mounting bracket
227). The resistor module is used for operation of the operator's fan.
1. Park the machine on a level surface, lower the cutting decks, and shut off
the engine. Remove the key from the key switch.
2. To access the resistor, remove the sunshade from the top of the ROPS
extension.
3. Disconnect the wire harness connectors from the resistor module terminals.
3
Figure 227
3. Resistor module
Page 6–67
(Figure
Electrical System: Component Testing