Toro Groundsmaster 4500-D Series Service Manual page 332

Toro Electronic Controllers (TEC) (continued)
Electrical System: Component Testing
g309763
The connection terminal functions for the TEC controllers are shown in
210 and Figure 211. Note that electrical power for controller outputs is provided
through 4 (4) connector terminals (PWR 2, PWR 3, PWR 4 and PWR 5) each
protected with a 7.5 amp fuse. A fifty (50) pin wire harness connector attaches to
each controller. The wire harness connector pins are identified in the diagram
in Figure 210 and Figure
plug into the TEC controllers is shown in
g309806
Figure 211
TEC 2 Controller
211. The layout of the wire harness connectors that
Figure
Figure 212
Page 6–50
212.
Groundsmaster ® 4500-D/4700-D
19245SL Rev A
Figure