Toro Groundsmaster 4500-D Series Service Manual page 394

Installation (Figure
Axles, Planetaries and Brakes: Service and Repairs
260) (continued)
13. Place the correct combination of shims on the gear case. Tighten mounting
nuts and screws from 47 to 56 N·m (35 to 41 ft-lb).
14. Install retaining rings and driven gear on input shaft/ pinion gear.
15. If the drive gear (on drive motor shaft) was removed, install the retaining rings
and drive gear on the motor shaft.
16. Use a new gasket and install the cover plate. Use a new O-ring and install
the drive motor.
Page 7–36 Groundsmaster ® 4500-D/4700-D
19245SL Rev A