Lift Arms For Cutting Decks #2 And #3 - Toro Groundsmaster 4500-D Series Service Manual

Lift Arms for Cutting Decks #2 and #3

g310535
1. Grease fitting
2. Set screw (2 used per stop)
3. Rotation stop
4. Flange head screw
5. Lock nut
6. Slotted roll pin
Removal (Figure 288)
Groundsmaster ® 4500-D/4700-D
19245SL Rev A
7. Pivot pin
8. Bumper
9. Thrust washer
10. Lift cylinder pin
11. Deck pivot shaft
12. Lift arm (#2 deck shown)
1. Park machine on a level surface, lower cutting decks, stop engine, engage
parking brake and remove key from the ignition switch.
2. Remove cutting deck from lift arm (see Cutting Deck Operator's Manual).
Figure 288
13.
14.
15.
16.
17.
18.
Page 8–15
Flange nut
Thrust washer
Cap screw
Lift cylinder
Lock nut
Flange bushing (2 used per arm)
Chassis: Service and Repairs