Ip Server Interface Leds - Avaya S8700 Installing Manual

Installing the S8700 Multi-Connect 277
Testing the Complete Configuration
Attendant Console LEDs
The console has 2 red LEDs, labeled "ALM" and "ACK". The ALM LED lights steadily when
there is a major or minor alarm at the media server. The ACK LED lights steadily if the alarm
has been successfully reported to INADS. If the media server is unable to report the alarm to
INADS, the LED flashes; this signals the attendant to call INADS and report the alarm.
Terminal Alarm Notification
Terminal Alarm Notification is an optional feature that displays several types of alarms on
telephones with administered feature buttons or the attendant console. A maximum of 10 digital
and/or hybrid telephones may be used.
When an alarm occurs, the green status LED associated with the assigned button is in a steady
state. The LED may be turned off by pressing the button associated with the LED. If the LED is
off and the alarm has not been resolved by the time maintenance reschedules testing, the green
status LED resumes its steady state.

IP Server Interface LEDs

The TN2312AP IP Server Interface (IPSI) circuit pack LEDs are shown in "TN2312AP circuit
pack faceplate"). It also has a programmable LED display to indicate whether its IP address is
dynamic (shows media gateway location) or static (shows I P). See "LED display on the IPSI
circuit pack—static address".
May 2002