Circuit Pack Leds - Avaya S8700 Installing Manual

280 Installing the S8700 Multi-Connect
Testing the Complete Configuration
LED display indicating connectivity status
Figure notes
Connectivity Status
IPSI is connected to media server
IPSI has an IP address
Laptop computer is connected to
IPSI services port

Circuit Pack LEDs

Typically, each circuit pack has 3 LEDs on the front panel. The
describes the red, green, and yellow LEDs and their meaning. Also see
Faceplate".
Circuit Pack LEDs
LED
Color
Red
Green
Yellow
1 2
Status Description
Alarm The media server has detected a fault in this circuit pack. The alarm
log should contain an on-board alarm. The red LED is also lit briefly
when a circuit pack is inserted or reset. If the circuit pack passes its
initialization tests, the LED goes out.
Testing The media server is currently running tests on this circuit pack as
part of background maintenance or demand testing. This LED is
also lit during initialization tests when a circuit pack is inserted or
reset.
Busy The circuit pack is currently in use.
3
1 2
no yes
no no
no no
May 2002
4 5
3 4 5
yes yes yes
yes yes no
no yes yes
"Circuit Pack LEDs"
"Circuit Pack LEDs on
table