Avaya S8700 Installing Manual page 54

54 Installing the S8700 Multi-Connect
Installing an Avaya MCC1 Media Gateway
5
NOTE:
If a media gateway is located remotely (in a separate room or building), route the media
gateway media gateway GROUND wire to an approved protective ground.
6
7
8
Typical Media Gateway Grounding Wiring Diagram
Figure notes
1
2
3
4
Route the media gateway GROUND wire to first media gateway and connect to the
single-point ground block and connect block.
Repeat connecting each media gateway to the single-point ground block.
Connect a 6 AWG (#40) (16 mm
ground block.
Route the ground wire to the AC load center ground and connect.
1
widfspgb KLC 100297
First Media Gateway
Additional Media Gateways (if
installed)
6 AWG (#40) (16 mm
Gateway GROUND Wire
Single-Point Ground Block
2
) ground wire to an unused terminal on the single-point
5
4
3
2
8 8
5
6
2
) Media
7
8
May 2002
6
7
3 3
2
8
6 AWG (#40) (16 4 mm
Wire to Approved Ground
AC Load Center Single-Point Ground
Over 50 ft. (15.2 m)
Media Gateway Ground Terminal
Block
2
) Ground