Avaya S8700 Installing Manual page 78

78 Installing the S8700 Multi-Connect
Installing an Avaya SCC1 Media Gateway Stack
Perform these tasks before you begin the installation:
•
•
•
•
Perform these steps to install the media gateways:
•
•
!
WARNING:
S8700 Multi-Connect configuration grounding must comply with the general rules for
grounding contained in Article 250 of the National Electrical Code (NEC), National Fire
Protection Agency (NFPA) 70, or the applicable electric code in the country containing the
equipment.
•
•
•
•
•
•
1
2
3
''Unpack and Inspect Media Gateways'' on page 79
''Unpack and Inspect Stratum 3 Clock Cabinet'' on page 107
''Check Circuit Packs'' on page 79
''Correct Shipping Errors'' on page 45
''Position the Media Gateway Stacks'' on page 80
(Optional)'' on page 46
''Install Earthquake Protection for Avaya SCC1 Media Gateway'' on page 80
required)
''Ground DC power media gateways'' on page 83
87 or ''Ground and Connect AC-Powered Media Gateways'' on page 94
''Connect Time Division Multiplexing Bus Cables'' on page 96
''Verify Port Media Gateway Address Plugs'' on page 98
''Install Rear Panels'' on page 99
''Install Rear Ground Plates (Media Gateways with Earthquake Protection)'' on page
100 or ''Install Front Ground Plates (Media Gateways with Radiation Shielding and
Earthquake Protection)'' on page 101
Gateways without Earthquake Protection)'' on page 103
''Connect S8700 Multi-Connect configuration Cables'' on page 104
Check the customer's order and the shipping packing lists to confirm all equipment is
present.
Check the S8700 Multi-Connect configuration adjuncts for damage and report all
damage according to local shipping instructions.
If any equipment is missing, report the information to your Avaya representative.
or
and
or ''Install Media Gateway Clips (Media
May 2002
''Position the Auxiliary Cabinet
''Connect DC Power'' on page
(if