Installing And Wiring Telephones; Wiring Telephones - Avaya S8700 Installing Manual

186 Installing the S8700 Multi-Connect

Installing and Wiring Telephones

Installing and Wiring Telephones
The wiring procedures are the same for most Avaya telephones and other equipment.
This task list provides wiring examples of similar installation procedures. These are examples
only; actual wiring procedures may vary at each site.
After installing the hardware, the data for the telephone features must be administered. These
procedures are provided in the Administrator's Guide for Avaya MultiVantage Software.
NOTE:
Refer to the Installation for Adjuncts and Peripherals for Avaya MultiVantage Solutions to
install the necessary peripheral equipment.

Wiring Telephones

Task List: Wiring Examples and Wiring Procedures
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Refer to the Job Aid entitled
information on pinouts.
''Connect Telephones'' on page 187
''Analog Tie Trunk Example'' on page 192
''Digital Tie Trunk Example'' on page 192
''DS1 Tie Trunk Example'' on page 193
''Auxiliary Connector Outputs (MCC1 and SCC1 media gateways only)'' on page 196
''Three-Pair and Four-Pair Modularity'' on page 199
''Adjunct Power Connection Locations'' on page 200
''Attendant Console Example'' on page 201
''Connect External Alarm Indicators and Auxiliary Power'' on page 204
''Connect Power Distribution Unit External Alarm Wires'' on page 205
''Remote Access'' on page 208
''Off-Premises or Out-of-Building Stations'' on page 209
''Emergency Transfer Units and Associated Telephones'' on page 214
''808A Emergency Transfer Panel and Telephone Installation Examples'' on page 215
''Install External Ringing'' on page 224
''Install the Queue Warning Indicator'' on page 225
''Installing and Wiring Telephone Power Supplies'' on page 226
Connector and Cable Diagrams (Pinout Charts)
May 2002
for