The Tn2302Ap Ip Media Processor; Ip Media Processor - Avaya S8700 Installing Manual

The TN2302AP IP Media Processor

The TN2302AP IP Media Processor provides on interface between a customer's IP network and
Avaya media gateways. This interface is used to transport voice and FAX between the media
gateways and IP devices such as H.323 V2 compliant endpoints and other Avaya telephone
systems.
NOTE:
The P board suffix designation means the circuit pack is firmware-downloadable. Refer to
Upgrading the Avaya S8700 Media Server
Pack Firmware for more information.
For information on TN802 IP Trunking, refer to the DEFINITY Enterprise Communications
Server Release 7 Installation and Test for Multicarrier Cabinets.

IP Media Processor

The following sections describe the process for
• ''Preparing for the installation'' on page 171
''Installing the TN2302AP IP Media Processor'' on page 173
•
For administration, refer to the Administration for Network Connectivity for Avaya
MultiVantage Software.
Preparing for the installation
In addition to the TN2302AP IP Media Processor, you must also install and administer a
C-LAN circuit pack (TN799DP). For C-LAN administration, refer to Administration for
Network Connectivity for Avaya MultiVantage Software.
Each TN2302AP can support between 32 and 64 voice channels, depending on the codecs used.
Check your onsite equipment
Have the following equipment on site before your shipment arrives:
An unoccupied port slot in the media gateway for each TN2302AP IP Media Processor
•
NOTE:
The TN2302AP consumes 16 W of power per slot compared with an average of 15 W per
slot. Do not fill every available slot in a given media gateway with them.
• An unoccupied port slot for the TN799DP.
A 10 BaseT or 10/100 BaseT Ethernet connection into your local area network (LAN)
•
for the TN2302AP.
Configurations,
May 2002
Installing the S8700 Multi-Connect
Connecting to the Customer's Network
Upgrade Selected Port Circuit
171