Satellite Locations - Avaya S8700 Installing Manual

The 356A adapter plugs into a 25-pair female cable connector. See
139. The 356A adapter divides the 25-pair cable into eight 3-pair circuits. Although the circuits
are 3-pair, the adapters modular jacks will accept the 8-wide modular plug used on the 4-pair
station cable.
!
CAUTION:
Adapters wired similarly to the 356A should not be used. Their jacks do not accept 4-pair
plugs.
Use theZD8AJ adapter to connect a Multi-button Electronic Telephone (MET) line cord to an
information outlet. The adapter interchanges pairs 3 and 4 to correspond with the pair
assignments for the telephone. The line cord plugs into the adapter, and then the adapter plugs
into an information outlet.

Satellite Locations

Satellite locations are closets that provide an administration point (using cross-connect
equipment) for station cables and where adjunct power may be applied. The station cable
circuits from the equipment room MDF are 3-pair. At the satellite location, 4-pair circuits run to
the information outlets. The hardware used is 110-type terminal blocks.
Satellite Locations Using 110-Type Hardware
Each terminal block has a 3-pair (white field) and a 4-pair (blue field) located on the same
terminal block.
The 110A-type terminal block that can be used is the 110AE1-75FT. It must be field-terminated
to both the white and blue fields.
The 300-pair 110P-type terminal blocks that can be used are:
110PE1-300CT/FT
•
blue field
—
• 110PE1-300FT
The 900-pair 110P-type terminal blocks that can be used are:
• 110PE1-900CT/FT
blue field
—
• 110PE1-900FT
.
451A Adapter Ordering Information
Color Comcode
Gray 103942272
Ivory 103786240
—
25-pair connector on the white field and field-terminated on the
Field-terminated on both the white and blue fields
—
25-pair connector on the white field and field-terminated on the
Field-terminated on both the white and blue fields
May 2002
Installing the S8700 Multi-Connect
Station Wiring Design
''356A Adapter'' on page
137