Using The P333T-Pwr - Avaya S8700 Installing Manual

Connect the Cables
Connect IP Telephones, PCs, servers, routers, workstations, and hubs
1 Connect the Ethernet connection cable (not supplied) to a 10/100 Mbps port on the front
panel of the Avaya P333T-PWR.
NOTE:
You should use standard RJ-45 connections. You must use CAT-5 cable for 100 Mbps
operation.
Connect the other end of the cable to the Ethernet port of the PC, server, router,
2
workstation, IP phone, switch or hub.
NOTE:
Use a cross cable when connecting the Avaya P333T-PWR to a switch or hub.
Check that the appropriate link (LNK) LEDs light up.
3

Using the P333T-PWR

The P333T-PWR Power over Ethernet Stackable Switch can be used to power 46xx series IP
telephones in addition to providing a 10/100 Mbps Ethernet connection. The switch can form
part of a stack with the G700 Media Gateway or members of the P330 stackable switching
system.
!
CAUTION:
The Avaya P333T-PWR does not contain any user-serviceable components inside. Do not
open the case.
!
CAUTION:
The P333T-PWR can be used only indoors, and in a controlled environment.
The P333T-PWR has 24 10/100Base-T ports, each of which can supply up to 16.5W using the
internal power supply and operates on a 100-240 VAC, 5.3A, 50/60 Hz power source with the
option of using the 44~57 VDC, 15A to boost the InLine power.
The P333T-PWR can be placed in a wiring closet or on a flat, stable surface like a desk. Screws
are provided for mounting in a standard 19-inch rack.
Installing and Wiring Telephone Power Supplies
May 2002
Installing the S8700 Multi-Connect 241