Verify Port Media Gateway Address Plugs - Avaya S8700 Installing Manual

For multi-connnect configurations
Hide thumbs Also See for S8700:
Table of Contents

Advertisement

98
Installing the S8700 Multi-Connect
Installing an Avaya SCC1 Media Gateway Stack

Verify Port Media Gateway Address Plugs

The address plug is a jumper field on port media gateways (J58890H) only. The address plug is
located on the far right hand side of the backplane, to the right of slot 00.
A group of six pins is labeled for the media gateway (carrier) jumper connections. Verify that
the address plug for each port carrier is in the correct location for that carrier. See
Gateway Address Plug Location — Rear of Media Gateway'' on page
setting is "B" (callout 2).
Port Media Gateway Address Plug Location — Rear of Media Gateway
Figure notes
1
2
3
4
6
7
Address Plug (shown set to carrier D)
Carrier B Jumper Location (Default)
Carrier C Jumper Location
Right Edge of Backplane
4
1
2
3
5
Right Edge of Media Gateway
Backplane Slot 00
6
To Connector Panel
7
May 2002
98. The factory default
5
add_plug CJL 050906
''Port Media

Advertisement

Table of Contents
loading

Table of Contents