Avaya S8700 Installing Manual page 177
For multi-connnect configurations
Hide thumbs
Also See for S8700:
- Maintenance manual (2618 pages) ,
- Installing manual (342 pages) ,
- Installing (326 pages)
Table of Contents
Advertisement
5
Type in the following information for the TN2302AP IP Media Processor and TN799DP
C-LAN:
NOTE:
Enable the Ethernet port last, after you have filled in the information in the other fields.
•
Set Slot field to UUCSS, where UUCSS is the cabinet, carrier, and slot.
•
The Code and SFX fields are automatically populated with TN799DP and
TN2302AP.
•
In the Node Name field type the same node name entered on the Node Name
screen.
•
In the Subnet Mask field use the default setting unless you are given a different
subnet mask.
•
In the Gateway Address field use the address you are given or leave blank.
•
Set the Net Region field to 1 unless you are given a different number.
•
Set the Enable Eth Pt field to y
6
Press
to save the information and effect the new settings.
Enter
Refer to the Administration for Network Connectivity for Avaya MultiVantage Software for
more information on these administration steps and for the steps to administer IP Softphones
and H.323 trunks.
May 2002
Installing the S8700 Multi-Connect
Connecting to the Customer's Network
177
Advertisement
Table of Contents
