Connect The P333T-Pwr - Avaya S8700 Installing Manual

240 Installing the S8700 Multi-Connect
Installing and Wiring Telephone Power Supplies

Connect the P333T-PWR

Power up—AC input
1
Figure notes
1
2
Power up—DC input (optional)
The P333T-PWR can operate on the AC input only. However, you may wish to use the optional
DC input for the following:
•
•
NOTE:
Please refer to the P333T-PWR User's Guide for more information.
Insert the power cord into the power connector (BUPS or Power Supply) on the rear of
the unit. See Figure.
1
2
BUPS connector
Insert the other end of the power cord into the electricity supply or the connector on the
BUPS.
The unit powers up and performs a self-test procedure. The LEDs flash at regular
intervals after the self-test procedure is completed successfully.
Backup for the Power over Ethernet ports
To provide more than 200W for the Power over Ethernet ports
2 AC connector
May 2002
psdlups KLC 032002