Install External Ringing - Avaya S8700 Installing Manual

224 Installing the S8700 Multi-Connect
Installing and Wiring Telephones

Install External Ringing

Connections for external ringing are at an information outlet. The media gateway side of the
Main Distribution Frame (MDF) is connected to a TN2183 (or equivalent) Analog Line circuit
pack. The circuitry and power source for the device are customer-provided.
NOTE:
A maximum of 3 devices can connect to 1 analog line circuit pack port.
1
2
3-Pair and 4-Pair Modularity
Figure notes
1. Port Circuit Pack
2. Media Gateway Connector Pins
(3-Pair Modularity)
3. Main Distribution Frame (MDF)
Pins (3-Pair Modularity)
Wire the ringing device to the information outlet as shown in
Modularity'' on page 224
Administer per the Administrator's Guide for Avaya MultiVantage Software.
and ''Example Adjunct Power Connections'' on page
4. Input to Information Outlet
(4-Pair Modularity)
5. Adjunct Power
6. Output From Information Outlet
(4-Pair Modularity)
7. Voice or Data Terminal Pins
May 2002
''3-Pair and 4-Pair
201.