Avaya S8700 Installing Manual page 90

90 Installing the S8700 Multi-Connect
Installing an Avaya SCC1 Media Gateway Stack
Connections Using DC Power Distribution Unit
Figure notes
1
2
3
4
5
6
7
8
9
10
11
12
13
14
Media Gateway Stack
DC Power Cabinet
DC Power Distribution Unit (position to right of the media gateway stack
White Wire (connect to Circuit Breaker). See inset.
Green Ground Wires and Black Wire (connect to the -48 VDC Return Bus)
-48 VDC Bus
Inset
12 in. (30.5 cm) from floor to DC Power Distribution Unit
DC Power Cable to Power Connector on Each Media Gateway.
DC Power Distribution Unit Power Cord (route to rear of DC Power Cabinet)
Route Power Cord Through Sliding Door
Circuit Breaker
Supplied #10-32 Screw, #10 Star Washer, and #10-32 Hex Nut
Inset Showing DC Power Connector (Male)
May 2002