Set Up Avaya Site Administration - Active Media Server; Input Translations; Reset Multivantage(Tm) Software - Avaya S8700 Installing Manual

Set up Avaya Site Administration - Active Media
Server
The following administration is done on the services laptop computer connected to the
non-dedicated network (customer LAN). The ASA switch record to connect to the active media
server will be unique for each customer.
NOTE:
At a minimum, Avaya Site Administration 1.11 should be used to work properly with the
Avaya 8700 media server and the Avaya MultiVantage software.
1 Plug the services laptop into a port on the customer's LAN.
2 On the laptop launch Avaya Site Administration
Click on File.
3
Click on New.
4
Click on Switch.
5
Follow the Add Switch wizard to build a configuration record for the current customer.
6
Give the switch record a unique name
•
• Select Network Connection as the connection method
• Use the active server IP address
• Use port 5023
When the switch record is established connect the laptop to the customer's LAN and test
7
by connecting to the active media server.

Input translations

Contact the installation personnel responsible for translation input to download translations. If
the translations are not ready, you may continue with the process, entering minimal translations
to verify connectivity to the port networks.

Reset MultiVantage(TM) software

NOTE:
Do not reset the MultiVantage software if no translations were input.
The following administration is done on a computer used to access the Avaya S8700 Media
Server using Avaya Site Administration.
1 If not already open, launch Avaya Site Administration.
2 Log into media server 1 (the active server) as craft.
3 Establish a SAT Emulation session.
4 Type reset system 4 and press
copied translations.
to get Avaya MultiVantage(TM) software to read the
Enter
May 2002
Installing the S8700 Multi-Connect
Configure the Hardware in the Rack
37