Adjunct Power Connection Locations - Avaya S8700 Installing Manual

200 Installing the S8700 Multi-Connect
Installing and Wiring Telephones
3-Pair and 4-Pair Modularity
Figure notes
1
2
3
4
Return to Task List

Adjunct Power Connection Locations

''Example Adjunct Power Connections'' on page 201
adjunct power. Adjunct power for station equipment may be supplied from the equipment room,
satellite location, or the work location.
For this figure, the following example is used:
1
2
3
Port Circuit Pack
Media Gateway Connector Pins
(3-Pair Modularity)
Main Distribution Frame (MDF) Pins
(3-Pair Modularity)
Input to Information Outlet (4-Pair
Modularity)
If 25 telephones are connected to the media gateway and all 25 telephones need adjunct
power, install a bulk power supply in the equipment room.
If only ten of the telephones need adjunct power, install a bulk power supply at the
satellite location.
If only one telephone needs adjunct power, install the individual power supply at the
work location.
5 Adjunct Power
6 Output From Information Outlet
(4-Pair Modularity)
7 Voice or Data Terminal Pins
shows typical connection locations for
May 2002