Connect Dc Power Distribution Unit Ground - Avaya S8700 Installing Manual

Frame Ground Wiring Between cabinet and Battery Cabinet
3
Figure notes
6 AWG (#40) (4mm
1
DC Battery Cabinet
2
3 DC power cabinet
Grounding Hole in Top of cabinet
4

Connect DC Power Distribution Unit Ground

Measure and cut a length of 6 AWG (#40) (4 mm
1
the GROUND DISCHARGE bar in the DC power cabinet and the GRD connector on the
DC-powered Distribution Unit. See
page 86.
At the cabinet, connect a the 6 AWG (#40) (16 4 mm
2
DISCHARGE bar.
Route the opposite end of the wire to the DC-powered Distribution Unit and connect the
3
wire to the GRD connector.
Repeat Steps 2 and 3 for each remaining DC-powered Distribution Unit.
4
1
2
) Wire
5
6
7
8
''Ground for the DC-Powered Distribution Unit'' on
May 2002
Installing the S8700 Multi-Connect
Installing an Avaya SCC1 Media Gateway Stack
2
dc_rect6 RBP 052996
Terminal Lug (Part of D-18181895)
Pan Head Slotted Screw
Star Washer
Hex Nut
2
) wire long enough to reach between
2
) wire to the GROUND
85