Verifying Connectivity To Media Server; Verifying That Ipsis Are Translated; Upgrading The Ipsi Firmware Version (If Necessary) - Avaya S8500 Installing And Configuring

Chapter 6: IP interface configuration

Verifying connectivity to media server

1. If not already open, open and log in to Maintenance Web Interface as craft.
2. Under Diagnostics, click Ping and select Other server(s), All IPSIs, UPS(s), Ethernet
switches to verify connectivity to these units.
3. Click Execute Ping.
4. Verify that all endpoints respond correctly.

Verifying that IPSIs are translated

1. Open a SAT session on the media server.
2. Type list ipserver-interface and press Enter.
3. Verify that all ISPI circuit packs are translated.

Upgrading the IPSI firmware version (if necessary)

You may need to upgrade the firmware on some or all the IPSIs. All IPSIs must be on the same
firmware load.
1. On the Maintenance Web Interface under IPSI Firmware Upgrades, click IPSI Version.
2. Select Query All and click View IPSI Version.
3. Verify the firmware release for each IPSI.
4. If an upgrade is required, follow the procedures in Firmware Download Procedures, which
can be accessed from:
ftp://ftp.avaya.com/incoming/Up1cku9/tsoweb/firmware/TNpackFirmwareDownloadInstructions.pdf
72
Installing and Configuring the Avaya S8500 Media Server February 2006