Verifying Connectivity To Media Server; Verifying That Ipsis Are Translated; Upgrading Ipsi Firmware Version (If Necessary) - Avaya S8700 Series Installing And Configuring

Connecting to the IPSIs

Verifying connectivity to media server

These steps verify connectivity to the media server.
1. If not already open, open a browser and log in as craft.
2. Click Launch Maintenance Web Interface.
3. Under Diagnostics, click Ping and select Other server(s), All IPSIs, UPS(s), Ethernet
switches to verify connectivity to these units.
4. Click Execute Ping.
5. Verify that all endpoints respond correctly.

Verifying that IPSIs are translated

These steps verify that the IPSIs are translated.
Note:
You must be on the active media server to use SAT commands.
Note:
1. Log into the media server using a terminal emulation application.
2. Type list ipserver-interface and press Enter.
3. Verify that all ISPI circuit packs are translated.

Upgrading IPSI firmware version (if necessary)

You may need to upgrade the firmware on some or all the IPSIs. All IPSIs must be on the same
firmware load.
These steps upgrade the IPSI firmware version.
1. Under IPSI Firmware Upgrades click IPSI Version.
2. Select Query All and click View IPSI Version.
3. Verify the firmware release for each TN2312BP IPSI. If an upgrade is required, follow the
procedures in Upgrading Software and Firmware—Avaya S8500 Media Server
(555-245-111), Upgrading IPSI Firmware.
4. Verify the firmware release for each TN2312BP IPSI. If an upgrade is required, follow the
procedures in Upgrading Software and Firmware—Avaya S8700 Series Media Server
(555-245-115), Upgrading IPSI Firmware.
68 Installing and Configuring the Avaya S8700 Series Media Server