Installing And Wiring Telephones; Wiring Telephones - Avaya S8700 Installing

214 Installing the Avaya™ S8700 Media Server with Avaya™ MCC1 or SCC1 Media Gateway

Installing and Wiring Telephones

Installing and Wiring Telephones
The wiring procedures are the same for most Avaya telephones and other equipment.
This task list provides wiring examples of similar installation procedures. These are examples
only; actual wiring procedures may vary at each site.
After installing the equipment, the data for the telephone features must be administered. These
procedures are provided in the Administrator's Guide for the Avaya™ Communication Manager
or with the specific telephone or console.
NOTE:
Refer to the Installation for Adjuncts and Peripherals for Avaya™ Communication
Manager to install the necessary peripheral equipment.

Wiring Telephones

Task List: Wiring Examples and Wiring Procedures
''Connect Telephones'' on page 215
•
''Analog Tie Trunk Example'' on page 219
•
• ''Digital Tie Trunk Example'' on page 220
''DS1 Tie Trunk Example'' on page 221
•
• ''Auxiliary Connector Outputs (MCC1 and SCC1 media gateways only)'' on page 224
• ''Three-Pair and Four-Pair Modularity'' on page 227
''Adjunct Power Connection Locations'' on page 228
•
• ''Attendant Console Example'' on page 229
• ''Connect External Alarm Indicators and Auxiliary Power'' on page 232
''Connect Power Distribution Unit External Alarm Wires'' on page 233
•
• ''Install Off-Premises Station Wiring'' on page 236
''Off-Premises or Out-of-Building Stations'' on page 236
•
• ''Emergency Transfer Units and Associated Telephones'' on page 242
• ''808A Emergency Transfer Panel and Telephone Installation Examples'' on page 243
''Install External Ringing'' on page 252
•
• ''Install the Queue Warning Indicator'' on page 253
''Installing and Wiring Telephone Power Supplies'' on page 254
•
Refer to the Job Aid entitled
information on pinouts.
Connector and Cable Diagrams (Pinout Charts)
May 2003
for