Installing And Wiring Telephones; Wiring Telephones - Avaya S8700 Installing Manual

162 Installing the Avaya™ S8700 Media Server with Avaya™ MCC1 or SCC1 Media Gateway

Installing and Wiring Telephones

Installing and Wiring Telephones
The wiring procedures are the same for most Avaya telephones and other equipment.
This task list provides wiring examples of similar installation procedures. These are examples
only; actual wiring procedures may vary at each site.
After installing the equipment, the data for the telephone features must be administered. These
procedures are provided in the Administrator's Guide for the Avaya™ Communication Manager
or with the specific telephone or console.
NOTE:
Refer to the Installation for Adjuncts and Peripherals for Avaya™ Communication
Manager to install the necessary peripheral equipment.

Wiring Telephones

Task List: Wiring Examples and Wiring Procedures
''Connect Telephones'' on page 163
•
''Analog Tie Trunk Example'' on page 167
•
• ''Digital Tie Trunk Example'' on page 168
''DS1 Tie Trunk Example'' on page 169
•
• ''Auxiliary Connector Outputs (MCC1 and SCC1 media gateways only)'' on page 172
• ''Three-Pair and Four-Pair Modularity'' on page 175
''Adjunct Power Connection Locations'' on page 176
•
• ''Attendant Console Example'' on page 177
• ''Connect External Alarm Indicators and Auxiliary Power'' on page 180
''Connect Power Distribution Unit External Alarm Wires'' on page 181
•
• ''Install Off-Premises Station Wiring'' on page 184
''Off-Premises or Out-of-Building Stations'' on page 184
•
• ''Emergency Transfer Units and Associated Telephones'' on page 190
• ''808A Emergency Transfer Panel and Telephone Installation Examples'' on page 191
''Install External Ringing'' on page 200
•
• ''Install the Queue Warning Indicator'' on page 201
''Installing and Wiring Telephone Power Supplies'' on page 202
•
Refer to the Job Aid entitled
information on pinouts.
Connector and Cable Diagrams (Pinout Charts)
May 2003
for