Setting Locations (If Necessary) - Avaya S8500 Installing And Configuring

Setting locations (if necessary)

After you set the daylight savings rules, you must set the locations for all media gateways
(cabinets). It is possible to have media gateways in different time zones. Even though you set
the date, time, and time zone through the Web interface on the media server, you also must set
locations through SAT commands.
1. Type change locations and press Enter.
change locations
Number Name
1 Main
2 CA
3
4
5
6
7
8
9
10
11
2. In the ARS Prefix 1 Required for 10-Digit NANP Calls? field, type y.
3. Type the information in the various fields for each media gateway.
Note:
In the Name field for location 1, call the media gateway (cabinet) Main.
Note:
4. Press Enter to effect the changes.
Installing and Configuring the Avaya S8500 Media Server
LOCATIONS
ARS Prefix 1 Required For 10-Digit NANP Calls? y
Timezone
Offset
+ 00:00
- 02:00
:
:
:
:
:
:
:
:
:
Daylight-Savings
Rule
0
0
Setting locations (if necessary)
Page 1 of
Number Plan
Area Code
February 2006
5
85