Siemens SINUMERIK 840DE sl Commissioning Manual page 88

Licensing
4.1 Determining the license requirement
References
For a detailed description, please refer to the following documentation:
CNC Commissioning Manual: NCK, PLC, drive; Chapter "Licensing"
Deactivate options
When importing old archives from other HMI systems, it can occur that options are set which
are no longer required in the actual system – however, these are subject to the license check:
Order number
6FC5800-0AP04-0YB0
6FC5800-0AP11-0YB0
6FC5800-0AP15-0YB0
6FC5800-0AP20-0YB0
6FC5800-0AP21-0YB0
6FC5800-0AP23-0YB0
6FC5800-0AP24-0YB0
4.1 Determining the license requirement
Procedure
74
Option
Machining step programming
Manual machine
ShopTurn HMI/ShopMill HMI for SINUMERIK 840Di sl incl. HMI-
Advanced
3D simulation of the finished part
Simulation, milling (2D dynamic; 3D static)
Simultaneous recording, ShopMill (real-time simulation)
Simultaneous recording, ShopTurn (real-time simulation)
1. Press the "All options" softkey to list all the options that can be selected
for this controller.
- OR -
Press the "Missing lic./opt." softkey.
You receive an overview of all options that
● are not adequately licensed
● are licensed, but which have not been set
2. Activate or deactivate the required options in the "Set" column:
● Activate the checkbox or
● Enter the number of options.
Options shown in red are activated, however, not yet licensed or not ad‐
equately licensed.
- OR -
Press the "Set option acc. to license" softkey to activate all of the options
contained in the license key.
You obtain a confirmation prompt that you must confirm with "OK".
Commissioning Manual, 12/2017, 6FC5397-1DP40-6BA1
SINUMERIK Operate (IM9)