Siemens SINUMERIK 840DE sl Commissioning Manual page 362

Transformations
15.7 Assigning parameters to transformation types and tool carriers
System variable assignment
Parameters are assigned for the following system variables using the operating software for
the TRAANG_K transformation type - "inclined axis" transformation:
Parameter or property
Name
Alternative call
Assignment of chains
Tool chain
Workpiece chain
Linear axis
Properties (transformation)
Include tool length in calculation
348
● No
● Yes
End of tool chain
End of workpiece chain
Machine axis X
Machine axis Y
Machine axis Z
● No (default)
● Yes
System variable
$NT_NAME[n]
$NT_TRAFO_INDEX[n]
= 0 (default)
> 0
$NT_TRAFO_INDEX[n] (fixed value)
Units digit
● 4: TRAANG
● Otherwise: error
$NT_TRAFO_INDEX[n]
Tens and hundreds digits
● 01 - 04: Call number
● Otherwise: error
$NT_TRAFO_INDEX[n]
Thousands and ten thousands digits
● 00, 01: Channel 1
● 02 - 10: Channel n
● 99: All channels
● Otherwise: error
$NT_T_CHAIN_LAST_ELEM[n]
$NT_P_CHAIN_LAST_ELEM[n]
$NT_GEO_AX_NAME[n, 0]
$NT_GEO_AX_NAME[n, 1]
$NT_GEO_AX_NAME[n, 2]
$NT_TRAFO_INCLUDES_TOOL[n]
(BOOL type)
= FALSE
= TRUE
Commissioning Manual, 12/2017, 6FC5397-1DP40-6BA1
Description
Name of transformation
Alternative call name for
this transformation
Alternative call name
Call number
Call from channel
Name of last chain ele‐
ment in the tool chain
Name of last chain ele‐
ment in the workpiece
chain
Name of chain element of
machine axis X
Name of chain element of
machine axis Y
Name of chain element of
machine axis Z
Include tool length in trans‐
formation calculation
SINUMERIK Operate (IM9)