Siemens SINUMERIK 840DE sl Commissioning Manual page 312

Collision avoidance
14.6 Changing and adapting the machine model view
Precondition
● You are in the graphic machine model editor.
● The "Graphic" and "Autozoom" softkeys are active.
Procedure
14.6.5 Displaying protection area elements for collision avoidance
In the graphic display, you can select between the following display types:
● Display model
In the graphic display of the machine model, all elements are displayed where the "Display"
or "Display+monitoring" setting was selected for element value "Use".
● Monitoring model
In the graphic display of the machine model, all elements are displayed where the
"Monitoring" or "Display+monitoring" setting was selected for element value "Use".
Both display versions can be simultaneously selected.
Precondition
● You are in the graphic machine model editor.
● The "Graphic" and "Autozoom" softkeys are active.
Procedure
298
1. Position the cursor in the graphic
2. Press the ">>" and "Views" softkeys.
2. Press the "From front" softkey if you wish to view the machine model from
the front.
- OR -
Press the "Side view" softkey if you wish to view the machine model from
the side.
- OR -
Press the "Top view" softkey if you wish to view the machine model from
the top.
1. Position the cursor in the graphic
2. Press the ">>" softkey.
Commissioning Manual, 12/2017, 6FC5397-1DP40-6BA1
SINUMERIK Operate (IM9)