Siemens SINUMERIK 840DE sl Commissioning Manual page 329

V1
V2
Display in the tree topology
Element values
Parameter
Name
Color
Detail level
SINUMERIK Operate (IM9)
Commissioning Manual, 12/2017, 6FC5397-1DP40-6BA1
Sum of the offset and rotation between this element and the root element.
Offsets and rotation from the parameters of this element.
Cone-shaped protection area elements are identified by this symbol in the tree
topology.
Meaning
Designation, which is displayed in the tree structure.
Selection of the color for the protection area element.
● Activate the checkbox "from protection area", if the color of the
● Select the required color from the selection list.
Defines from which detail level the protection area or the protection area
elements are displayed on the user interface.
● Activate the checkbox "from protection area", if the detail level of
● Enter the desired level of detail:
associated tool and/or machine protection area should be applied.
Deactivate the checkbox "from protection area" in order to select
any color.
the associated tool and/or machine protection area should be
applied.
Deactivate the check box "from protection area", if you wish to define
your own detail level for the element.
– Lowest detail level: 0
– Highest detail level: 3
Collision avoidance
14.7 Creating a kinematic structure
315