Siemens SINUMERIK 840DE sl Commissioning Manual page 445

</Dealer>
</Addresses>
You enter the address data of any number of manufacturers in the "oem.xml" file. If you want
to enter additional manufacturers, copy the area <Manufacturer> to </Manufacturer> for each
dealer.
You enter the address data of any number of manufacturer subsidiaries in the "oemsubs.xml"
file. If you want to enter additional subsidiaries, copy the area <Manufacturer-Subsidiary> to
</Manufacturer-Subsidiary> in each case.
You enter the address data of any number of users in the "user.xml" file. If you want to enter
additional users, copy the area <User> to </User> in each case.
Example of file "ma_types.xml"
You enter the available machine types in the file "ma_types.xml".
<?xml version="1.0" encoding="utf-8" ?>
<Machinetypes>
<Type>LC 80</Type>
<Type>LC 82</Type>
<Type>LC 120</Type>
<Type>LC 122</Type>
<Type>LC 150</Type
</Machinetypes>
18.5.3 Import template
You read your templates directly into the controller. You select and import the files from a local
drive, network drive or USB depending on the configuration. The data is then automatically
copied into the following folder: /oem/sinumerik/hmi/template/identity or HMI-data/templates/
manufacturer/machine identity.
SINUMERIK Operate (IM9)
Commissioning Manual, 12/2017, 6FC5397-1DP40-6BA1
<Customer-Id></Customer-Id>
<Name></Name>
<Street></Street>
<ZIP code></ZIP code>
<Location></Location>
<Country></Country>
<State></State>
<Contact></Contact>
<Phone></Phone>
<Fax></Fax>
<E-mail></E-mail>
<URL></URL>
Service and diagnostics
18.5 Machine identity
431