Siemens SINUMERIK 840DE sl Commissioning Manual page 184

Tool management
12.2 Configuring the user interface
● Configuring the "Load Station Selection" window
● Coolant and tool-specific functions
● Reason for the tool change when reactivating
● Configure the code carrier connection
● Configuring store to file
The following sections explain how you configure these adaptations.
Procedure
1. Open the directory: /siemens/sinumerik/hmi/template/cfg.
2. Copy the "oem_sltmlistconfig.xml" template file
3. Copy the file to the directory /oem/sinumerik/hmi/cfg
OR: /user/sinumerik/hmi/cfg.
4. Change the file name according to the set technology:
5. Remove the comments of the example in the template to create your specific configuration.
Configuration examples
Examples for all possible configurations are provided in the template oem_sltmlistconfig.xml,
which are described individually in the following sections:
<?xml version="1.0" encoding="UTF-8" standalone="yes"?>
- <CONFIGURATION>
<!--
<!--
<!--
Configuration examples
<!--
<!--
<!--
</CONFIGURATION>
170
File name
sltmlistconfig.xml
sltmturninglistconfig.xml
sltmmillturnlistconfig.xml
sltmcirculargrindinglistconfig.xml
sltmsurfacegrindinglistconfig.xml
sltmplclistconfig.xml
************************************************************-->
enter your configuration behind this comment -->
************************************************************** -->
************************************************************** -->
enter your configuration ahead this comment -->
************************************************************** -->
MD52200 technology
Milling technology
Turning technology
Milling technology
Cylindrical grinding technolo‐
gy
Surface grinding technology
PLC tool management
"TRANSLINE 2000"
Commissioning Manual, 12/2017, 6FC5397-1DP40-6BA1
MD52201 technology exten‐
sion
Turning technology
SINUMERIK Operate (IM9)