Siemens SINUMERIK 840DE sl Commissioning Manual page 250

Tool management
12.4 Examples
12.4.1.2 Adaptation of the customer text file
The following excerpt shows the contents of the "sltmlistdialog_eng.ts" customer text file.
The file in this example is stored in the "user/sinumerik/hmi/lng" directory.
Example
"sltmlistdialog_eng.ts" file:
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE TS><TS>
<!-- ************************************************************** -->
<!-- Definition of OEM texts
<!-- ************************************************************** -->
<context>
<!-- ************************************************************** -->
<!-- Enter your text behind this comment
<!-- ************************************************************** -->
236
<name>SlTmListForm</name>
<!-- **** OEM tool parameter 1 headline *** -->
<!-- **** Weight *** -->
<message>
<!-- **** Text identifier *** -->
<source>TM_HL_TOOL_USER_1</source>
<!-- **** Text that is output *** -->
<translation>%nweight</translation>
<!-- **** Comment only for the translator *** -->
<remark>priority tool</remark>
<!-- **** Maximum line length in characters *** -->
<!-- **** only for the translator *** -->
<chars>7</chars>
<!-- **** Number of possible lines *** -->
<!-- **** only for the translator *** -->
<lines>2</lines>
</message>
<!-- **** OEM tool parameter 1 tooltip *** -->
<!-- **** Weight *** -->
<message>
<source>TM_TT_TOOL_USER_1</source>
<translation>weight of the tool</translation>
<chars>35</chars>
<lines>2</lines>
-->
-->
Commissioning Manual, 12/2017, 6FC5397-1DP40-6BA1
SINUMERIK Operate (IM9)