Siemens SINUMERIK 840DE sl Commissioning Manual page 189

Entries
FixKindOfDistInMultiTools
DlDisplayMode
CombinedToolMonitoring
FiltersCombinedWithOr
AddToGrindingSpindles
HideGrindingSpindles
SINUMERIK Operate (IM9)
Commissioning Manual, 12/2017, 6FC5397-1DP40-6BA1
12.2 Configuring the user interface
Meaning
Multitools are created with a fixed type of clearance input of
the multitool locations. There is no prompt when you create
the multitool.
Possible input value: 3 - clearance of the multitool locations
as an angle.
● DisplayDistributed - default setting, the setup offsets EC
are displayed in the tool list and the additive offsets SC
are displayed in the tool wear list.
● EcInWearList - the setup offsets EC are displayed in the
tool wear list and the additive offsets SC are not
displayed.
Specifies the combined monitoring types offered in the tog‐
gle field:
● Time/Count - tool life and workpiece count
● Time/Wear - tool life and wear monitoring
● Count/Wear - workpiece count and wear monitoring
● Time/WearDlSc - tool life and wear monitoring for
additive and setup offsets
● Count/WearDlSc - workpiece count and wear monitoring
for additive and setup offsets
● Time/Count/Wear - tool life, workpiece count and wear
monitoring
● Time/Count/WearDlSc - tool life, workpiece count and
wear monitoring for additive and setup offsets
Defines the filter criteria, which are linked in the filter window
using a logical OR. The default setting for all the filter criteria
is a logical AND. The possible entries are:
● "StandBy" - for tools that are ready for use
● "Active" - for tools with active identifier
● "Locked" - for locked tools
● "Prewarn" - for the prewarning limit
● "RemainingPieces" - for the remaining unit quantity
● "RemainingTime" - for the remaining tool time
● "MarkedToUnload" - for the unload identifier
● "MarkedToLoad" - for the load identifier
Defines the spindle numbers that are to be offered in the
"GrindingSpindleNo" ($TC_TPG1) parameter when select‐
ing the grinding spindles. The numbers of the grinding spin‐
dles must be separated by a space, e.g. -1 8 9.
Default display: real NC spindles and 0
Defines the spindle numbers of the real NC spindles that
are not to be offered in the "GrindingSpindleNo"
($TC_TPG1) parameter when selecting the grinding spin‐
dles. The numbers of the grinding spindles must be sepa‐
rated by a space, e.g. 1 3.
Tool management
175