Siemens SINUMERIK 840DE sl Commissioning Manual page 371

Data of the control components
Control components
NC data
PLC data (including CP)
Drive data
HMI data, all
HMI data, selection:
SINUMERIK Operate (IM9)
Commissioning Manual, 12/2017, 6FC5397-1DP40-6BA1
With compensation data ● QEC - quadrant error compensation
With compile cycles
Texts
Templates
Applications
Engineering data
Configuration
Help
Version data
Logs
Program lists
Dictionaries
Data backups
Programs on local drive Programs contained in the user memory area of the CompactFlash
Data
Machine data
Setting data
Option data
Global (GUD) and local (LUD) user data
Tool and magazine data
Protection zone data
R parameters
Zero offsets
Workpieces, part programs and subprograms
Standard and user cycles
Definitions and macros
● CEC - operation/angularity compensation
● EEC - leadscrew pitch / encoder error compensation
It only makes sense to archive machine-specific compensation data
if the start-up file is reloaded into the same control.
Compile cycles (*.elf) are displayed, if compile cycles are available.
OB (organization blocks)
FB (function blocks)
SFB (system function blocks)
FC (functions)
SFC (system functions)
DB (data blocks)
SDB (system data blocks)
Archiving the drive data, either in binary or ASCII format.
If data is available, you must set the check mark to activate the
components.
User texts, alarm texts
Individual templates, workpiece templates
HMI applications, OEM applications
Engineering data
Configurations, incl. display of machine data
Help files
Version data
Error logs
Program lists
Dictionaries
Files located in the data tree of the "System data" in the "HMI data /
data backups" directory.
card.
Data backup
16.2 Creating a start-up archive
357