Siemens SINUMERIK 840DE sl Commissioning Manual page 222

Tool management
12.2 Configuring the user interface
12.2.13 Configuring the "Details" window
<DETAILSCONFIGURATION> tag
In the tag <DETAILSCONFIGURATION>, you can make the settings for the "Detail" window:
Entries
ShowToolNumber
UseAxisNameInLength
ShowBaseLength
ShowYAxis
AutoDisplayAxisEnabled
Example
<DETAILSCONFIGURATION>
</DETAILSCONFIGURATION>
12.2.14 Assigning a name for magazines and magazine locations
<MAGAZINEPLACENAMECONFIGURATION> tag
The entries to assign dedicated magazine location names are located in the
<MAGAZINEPLACENAMECONFIGURATION> tag. Magazine locations can be displayed with
texts. Instead of the identifier, e.g. 1/5 for the first magazine, location five, the configured text
is then output in the tool lists.
Entries
MAGAZINE_XXX
PLACE_XXX
Name
Example
<MAGAZINEPLACENAMECONFIGURATION>
208
Meaning
The tool number is displayed in the upper right field of the "Detail" window.
The tool length is displayed with axis identifiers, for example, Length X
instead of Length 1.
If no data is specified, then the setting is taken from the tool lists.
The basic length is displayed in the "Detail" window (AdaptLength1,
AdaptLength2 and AdaptLength3).
If no data is specified, then the setting is taken from the tool lists.
The Y axis is displayed in the "Detail" window.
If no data is specified, then the setting is taken from the tool lists.
Several components of the tool length are displayed, even if only one
tool length is displayed in the tool list.
<ShowToolNumber value="true" type="bool" />
Meaning
XXX stands for the magazine number.
XXX stands for the location number.
Text identifier of the magazine location.
<MAGAZINE_9998>
Commissioning Manual, 12/2017, 6FC5397-1DP40-6BA1
SINUMERIK Operate (IM9)