Siemens SINUMERIK 840DE sl Commissioning Manual page 413

Change password
Trace parameters
You can parameterize the conditions for the log recording via the "Parameters (tcpdump)" input
field in the Network Trace window.
Syntax
<switch> <option>
<switch> parameters
Value
-D
-i <interface>
-n
-c <number>
-C <file size>
-e
-q
-vv
-S
-A
-xx
-XX
-s <bytes>
Note
The value -w is always implicitly contained in the call for the creation of the standard log file:
HMI data/Logs/Network trace/tcpdump.pcap or windump.pcap
SINUMERIK Operate (IM9)
Commissioning Manual, 12/2017, 6FC5397-1DP40-6BA1
1. The "Network Trace" window is open.
2. Press the "Change password" softkey.
The "Change Password" window opens.
Enter a new password and confirm with "OK".
Meaning
Displays a list of all network interfaces. All other <Switch> parameters
are ignored.
Defines which network interface has to be checked.
Host names are not resolved.
The recording is stopped after a defined number of packets.
Limits the file size. When the file size is reached, a new file with name
and consecutive number, starting with 1, is created. The unit of the file
size corresponds to million bytes.
Outputs the Ethernet header.
Creates an abbreviated log version.
Creates more detailed packet information.
Changes the packet sequence number from absolute to relative.
Outputs the contents of a packet as ASCII.
Outputs the contents of a packet as Hex.
Outputs the contents of a packet as Hex and as ASCII.
Specifies the packet size in bytes that has to be recorded per packet.
The default is 68 bytes.
Configuring the network
17.6 Station-related network diagnostics
399