Siemens SINUMERIK 840DE sl Commissioning Manual page 4

Preface
Target group
This documentation is intended for commissioning personnel.
The plant or system is readily assembled and wired. For the
following steps, e.g. configuring the individual components,
the Commissioning Manual contains all necessary information or at least references.
Benefits
The intended target group can use the Commissioning Manual to test and commission the
system or the plant correctly and safely.
Utilization phase: Setup and commissioning phase
Standard scope
This documentation only describes the functionality of the standard version. Additions or
revisions made by the machine manufacturer are documented by the machine manufacturer.
Other functions not described in this documentation might be executable in the control. This
does not, however, represent an obligation to supply such functions with a new control or when
servicing.
For the sake of simplicity, this documentation does not contain all detailed information about
all types of the product and cannot cover every conceivable case of installation, operation, or
maintenance.
Technical Support
Country-specific telephone numbers for technical support are provided in the Internet at the
following address (https://support.industry.siemens.com/sc/ww/en/sc/2090) in the "Contact"
area.
CompactFlash Cards
● Do not remove the memory card while it is being accessed. This can lead to damage of the
memory card and the SINUMERIK as well as the data on the memory card.
● Insert the memory card carefully and the right way round into the memory card slot (observe
indicators such as arrow or similar). This way you avoid mechanical damage to the memory
card or the device.
● Only use memory cards that have been approved by Siemens for use with SINUMERIK.
Even though SINUMERIK follows general industry standards for memory cards, it is
possible that memory cards from some manufacturers will not function perfectly in this
device or are not completely compatible with it (you can obtain information on compatibility
from the memory card manufacturer or supplier).
● For further information on handling CompactFlash cards, please refer to the NCU manuals.
4
Basesoftware and operating software
Commissioning Manual, 12/2017, 6FC5397-1DP40-6BA1