Functionality
5.4 Alarms
5.4.2
Subscribe / unsubscribe to alarms
Subscribe to alarms
The SINUMERIK Alarm Event object is connected to the SINUMERIK node. To receive the
alarms, an event subscription must be placed at the SINUMERIK node. The following example
describes how to receive the alarms using the OPC UA Foundation Client:
1. Open the "Quickstart Alarm Condition Client".
Figure 5-3
2. Click "Conditions > Set Area Filter...". The "Select Area" window appears.
Figure 5-4
3. Select "Sinumerik".
4. Click "OK".
The alarms will be displayed on the screen.
46
Alarm Condition Client
The Select Area Window
SINUMERIK Integrate for Engineering Access MyMachine / OPC UA
Configuration Manual, 12/2017, 6FC5397-1DP40-6BA1