Siemens SINUMERIK 840DE sl Commissioning Manual page 225

12.2.16 Assigning a name for magazine location types
<PLACETYPECONFIGURATION> tag
You can find entries to allocate your own location type identifiers in the tag
<PLACETYPECONFIGURATION>. Magazines and magazine location types can be displayed
with texts in the tool lists. Instead of identifier 2, e.g. for location type 2, the configured text is
then output in the tool lists.
Entries
PLACETYPEXXX
Text
Tooltip
Example
<PLACETYPECONFIGURATION>
</PLACETYPECONFIGURATION>
SINUMERIK Operate (IM9)
Commissioning Manual, 12/2017, 6FC5397-1DP40-6BA1
Meaning
XXX stands for the number of the location type.
Text identifier of the location type.
Tooltip text identifier of the location type.
<PLACETYPE1>
<Text value="TM_PLACETYPE_1" type="QString" />
<Tooltip value="TM_TT_PLACETYPE_1" type="QString" />
</PLACETYPE1>
<PLACETYPE2>
<Text value="TM_PLACETYPE_2" type="QString" />
<Tooltip value="TM_TT_PLACETYPE_2" type="QString" />
</PLACETYPE2>
<PLACETYPE3>
<Text value="TM_PLACETYPE_3" type="QString" />
<Tooltip value="TM_TT_PLACETYPE_3" type="QString" />
</PLACETYPE3>
Tool management
12.2 Configuring the user interface
211