Siemens SINUMERIK 840DE sl Commissioning Manual page 324

Collision avoidance
14.7 Creating a kinematic structure
Parameter
Use
Length (X)
Width (Y)
Height (Z)
Offset (X)
Offset (Y)
Offset (Z)
Rotary axis (X)
Rotary axis (Y)
Rotary axis (Z)
Angle of rotation
See also
Creating protection area elements (Page 306)
310
Meaning
● Display
The protection area element is shown in the graphic view.
The element is only visible if the "Display model" softkey is active.
The element is not monitored for collision.
● Monitoring
The protection area element is used for the collision avoidance.
The element is only visible if the "Monit. model" softkey is active.
● Display and monitoring
The protection area element is used for display in the graphic view
and for collision avoidance.
The element is visible in both display versions.
Length of the cube in the X direction.
Width of the cube in the Y direction.
Height of the cube in the
Z direction.
X component of the direction vector.
Y component of the direction vector.
Z component of the direction vector.
X component of the rotation vector.
Y component of the rotation vector.
Z component of the rotation vector.
The value by which the system rotates around the rotation vector.
Commissioning Manual, 12/2017, 6FC5397-1DP40-6BA1
SINUMERIK Operate (IM9)