Changing The Display Variables And Precision - Emerson Micro Motion 2700 Configuration And Use Manual

Configuration
4.16.6

Changing the display variables and precision

The display can scroll through up to 15 process variables in any order. You can select the process
variables you wish to see and the order in which they should appear.
Additionally, you can configure display precision for each display variable. Display precision controls
the number of digits to the right of the decimal place. The range of the display precision is 0 to 5.
Table 4-17 shows an example of a display variable configuration. Notice that you can repeat variables
and you can choose a value of "None." The actual appearance of each process variable on the display
is described in Appendix B.
Table 4-17 Example of a display variable configuration
Display variable
Display variable 1
Display variable 2
Display variable 3
Display variable 4
Display variable 5
Display variable 6
Display variable 7
Display variable 8
Display variable 9
Display variable 10
Display variable 11
Display variable 12
Display variable 13
Display variable 14
Display variable 15
To change the display variables, refer to the flowcharts in Figure 4-20.
78
Process variable
Mass flow
Volume flow
Density
Mass flow
Volume flow
Mass totalizer
Mass flow
Temperature
Volume flow
Volume totalizer
Density
Temperature
None
None
None
Model 2700 Transmitter with PROFIBUS-PA